1 x 150g pot.
The desire to wax your car or motorcycle begins with the Temptation to bring beauty to what can otherwise be a drab part of modern life. Auto Finesse Temptation is our latest entry-level wax, designed to protect and beautify your vehicles finish with a startling gloss, while being easy and enjoyable to use for detailing enthusiasts of any skill level. Its warm, glowing finish is beyond what you would normally find from an entry level product, and indicative of a truly premium grade wax.
All Auto Finesse waxes are carefully blended by hand in Great Britain from the finest quality natural ingredients available, and bring with them the same philosophy of performance and beauty as the rest of our car care products. The waxes we use treat your vehicle with natures own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.). Lets take a look at what else makes Auto Finesse Temptation special…
Auto Finesse Temptation contains 28% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up by all natural Beeswax, and oils.
Temptation is suitable for use on all paint types, whether they are solid or metallic. With a warm, wet gloss and depth that brings a subtle, classy glow to light and dark colours alike.
With an average of 2-months of durability, Auto Finesse Temptation is the perfect summer wax, with a sweet pineapple scent that is fitting with the season.
Strong beading and sheeting performance repels the worst an English summer has to offer, and resists water spotting, so your pride and joy looks its best when the sun is shining.
Developed with first-time detailers in mind, Temptation is the easiest, and most forgiving waxes to use in the Auto-Finesse range. It can easily be applied to an entire vehicle at once, and still buff off with zero effort.
Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the realities of everyday life. For the detailing professional or dedicated weekend enthusiast, there simply is no finer way to complete your flawless Auto Finesse style finish.
Before waxing, make sure that the vehicle is clean, and cool to the touch. If bonded contamination is present, use a Clay Bar to prep the surface for best results. If the paintwork is lightly marred, or the vehicle has not been polished in the last 6-12 months, it is also advisable to use one of our signature Pre-Wax Cleansers in order to create the maximum shine. Place an Auto Finesse Waxmate foam applicator inside the pot of wax, and rotate it half a turn to prime the pad with product. This is typically enough wax to protect a single moderately-sized panel, though this may vary depending upon the condition of the paintwork. Apply the wax to the panel with small, overlapping circular strokes, light pressure, and in a consistent pattern to obtain full coverage of the paint. If the applicator feels like it is starting to run dry across the surface, or coverage becomes uneven, return the applicator to the container using another quarter-turn of the pad to re-prime the foam. The goal when waxing is to apply the product as thinly and evenly as possible, since a little bit goes a very long way to protecting and enhancing the shine of your vehicle.
Once you have completed one normal-sized panel, or half of a large one, move on to another section of equal size. When you are done waxing the second section, you will be ready to buff off the wax from the first using a plush Microfiber Towel. Alternating in between buffing and waxing panels until the vehicle is fully protected allows you to maintain the ideal curing times for the wax, and makes for very easy removal of the remaining residue. Auto-Finesse Passion only takes a few minutes to cure, so take care not to let the product dry onto the surface. If the wax has been allowed to dry, or secondary hazing of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based QD like Auto-Finesse Finale to help ease removal of the residue. When applying multiple layers of wax for extra depth, wetness, and protection, make sure to wait at least 3-hours in between coats to allow the organic solvents to fully flash.
For best results, do not wax the vehicle if the ambient temperature is below (Approximately 6-degrees Celsius), or above 95-degrees Fahrenheit (35-Degrees Celsius). Waxing in direct sunlight, or conditions of high humidity can respectively lead to over, or under-curing of the product before removal.